期刊名称：COMPTES RENDUS MECANIQUE
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
The journal Comptes Rendus Mecanique covers all domains of Mechanics including the specific topics:
- Dynamic systems
- Solid mechanics
- Fluid mechanics
- Acoustics, waves, vibrations
- Control, signal processing.
Articles presented are original notes describing briefly (4 or 6 pages) significant results, short review papers, or historic chronicles (12 pages).
A note to the Comptes Rendus is the initial report of a novel discovery or a significant result. The Comptes Rendus Mecanique aim at keeping a high scientific level and a prime position among rapid publication scientific reviews.
The scientific quality of articles is guaranteed by international peer-reviewing.
The periodicity of this series, 12 issues per year, allows rapid publication. You will be able to read articles about scientific discoveries, two or three months after their acceptation.
Articles are written mainly in English. Articles in French are accompanied by a synthesis of at least one page in English.
Texts come from the entire international community and distribution of the journal is regularly widening throughout the world, with an increasing number of readers and authors, especially in countries where the contributions to scientific advancement are particularly active. |
Instructions to Authors
Comptes Rendus Mecanique
Acad¨¦mie des sciences
23, quai de Conti, 75006 Paris, France
Tel.: (+33) (0)1 44 41 43 69
Fax: (+33) (0)1 44 41 43 74
e-mail: comptes-rendus@academie-sciences.fr
Contributions (hereafter called ?articles?) published by this journal are either notes or Review articles written on invitation of the Editorial Committee or constituting part of a thematic special issue.
The Comptes rendus provide for very rapid publication (within 8 weeks of acceptance of the manuscript) and for a worldwide distribution. Please follow these instructions carefully so that your manuscript may be handled expeditiously. They are liable to modifications. As a consequence, we request that authors always consult the last issue available.
Submission and reviewing of manuscripts
Submission of a research paper implies that it reports unpublished work and that it is not under consideration for publication elsewhere. The manuscripts (in triplicate) must be submitted to a member of the Academy, a foreign associate or a correspondent, who will communicate the paper to the Comptes rendus office of the French Academy of Sciences. Alternatively, the manuscript may be submitted directly to the executive secretary of the editorial committee who will then find an appropriate person to present it. Every article will be reviewed by appropriate referees selected by the editorial office. Acceptance or rejection of the paper depends on editorial assessment of its suitability and reports from the referees. Changes requested by the reviewer(s) should be sent to the ?Service des Comptes rendus? within 3 weeks, except in particular cases, to avoid delays before final acceptance of the paper. The scientific field under which it is to be published must be indicated at the time of submission. A list of headings is found at the beginning of each issue.
Preparation of manuscripts
To compile notes in (La)TeX, you can download the style and class files at the addresses listed below. This allow you to standardise the length of your notes, according to the criteria given below.
- Style sheet (English) : http://www.elsevier.fr/html/ia_img/style-pp2_e.tex
- Class sheet (English) : http://www.elsevier.fr/html/ia_img/classe-pp2_e.cls
- Style sheet (French) : http://www.elsevier.fr/html/ia_img/style-pp2_f.tex
- Class sheet (French) : http://www.elsevier.fr/html/ia_img/classe-pp2_f.cls
It is also suggested that you download the definition files below.
- Definition files : http://www.elsevier.fr/html/ia_img/utile.def
- Language and length Contributions can be submitted in English or in French. They must include a title and an abstract (of 100 words maximum) - and, if required, the figure and table captions - in the two languages.
It is recommended that authors include an ?abridged version? in the second language.
The length of articles is limited to 6 printed pages (4 pages only for articles in French without an abridged version in English).
Exceptionally, a maximum of 2 additional pages, with the extra cost being charged to the author (115 euros per page inclusive of tax) can be allowed.
However, in the case of a Review paper, the page allowance is of 12 printed pages, all eventual supplementary costs being paid by the ?Acad¨¦mie? (additional pages, leaflets, plates).
- Presentation and section of the manuscript
It must be typed, double spaced, on one side of the paper only, and each page must be numbered. Each copy will be accompanied by figures and tables.
Manuscripts should be divided into the following section sequence: title page, abstracts, keywords (maximum 7, in English and French), abridged version in the second language (for bilingual articles ), text of the article in the first language, acknowledgements (if desired, maximum 3 lines), references, figure captions, figures, tables. The abstract (100 to 150 words) and keywords must be written in French and in English. Section headings should be numbered following the international numbering system (1.; 1.1.; 1.1.1.). Footnotes are not permitted.
- Title page
The first page must indicate: the scientific field under which the article is to be published (only one), followed, if necessary, by a single secondary field; the title in English and in French, short (maximum 80 characters), specific and informative, and including one or two words for indexing purposes; a running title (maximum 60 characters); the author?s first name followed by her/his surname; the authors? addresses, including the department, institution, city with postal code, and country. The author to whom proofs are to be sent must be indicated and this address must include his/her telephone/fax numbers and e-mail address.
- References
References must be numbered and listed sequentially as they appear in the text (all autotext, field, bookmark, caption, cross-reference, etc. options must be avoided since they cannot be exploited). All entries in the reference list must correspond to references in the text and vice versa. References must be cited in the text by their number between square brackets. When authors? names are cited in the text (within a sentence), their spelling must be identical to that in the reference list.
The titles of journals should be abbreviated according to the international rules . Bold and italic characters should not be used in the reference list, except when made necessary by the context (for example, in Palaeontology). Multiple references under the same number are not permitted.
Examples are given below of the layout to be used in the reference list.
Article (all authors must be mentioned):
[1] E. Tuliska-Sznitko, E. Serre, P. Bontoux,On the nautre of boundary layer instabilities in a flow between a rotating and a stationary disc, C. R. Mecanique 330 (2002) 91-99.
Book:
[2] E. Sanchez-Palencia, Non-Homogeneous Media and Vibration Theory, Springer, Berlin, 1980.
Chapter in a book:
[3] M. Amielh, M.-P. Chauve, R. Dumas, Heating effects in confined coaxial turbulent jets, in: W. Rodi, E. N. Ganic (Eds.), Engineering Turbulence Modeling and Experiments, Elsevier, New York, 1980.
- Figures
All illustrations should be labelled as figures and numbered using Arabic numerals. Every figure must be cited in the text. A set of original documents or photographs should be provided for reproduction of the figures. Whenever possible, figures should be submitted in their desired final size; they should not exceed 150 mm in width. No original document should in any case exceed A4 size (21 X 29.7 cm). Photographs and half-tones should contain good contrasts. See section below concerning documents supplied in electronic format. Figures in colour are published free of charge at the discretion of the Editor-in-Chief (within a limit of 16 pages per year); otherwise they will be charged to the authors (Euros 457 [FF 2 997.72] for the first one and Euros 228 [FF 1 495.58] for each following one).
- Tables
They should be together at the end of the manuscript, even if they appear within the text. They should be numbered using Roman numbers and should be in numerical order in the text. There should not be vertical lines in the tables. A caption is required for each table.
- Conventions and abbreviations
Abbreviations should be defined in brackets after their first mention in the text. Internationally accepted units and nomenclature must be used (ISO 31 and ISO 1000). Standard units of measurements and chemical symbols of elements may be used without definition in the manuscript.
- Formulae and equations
Mathematical equations and formulae must be clearly set out; in particular, exponents and indices should be carefully placed. Less common symbols should either be indicated in the margin of the manuscript or in a list. If necessary, special instructions or explanations for the printer should be clearly set out on a separate sheet attached to the manuscript. Moreover, no sentence should begin with a mathematical formula. Each numbered formula must be cited in the text by its number.
- Electronic documents
All articles must be supplied on disk or Zip (Macintosh or PC formatted - see the document Instructions for the preparation of electronic files, sent to authors by the ?Service des Comptes rendus? and available on the publisher?s web site at the following address: www.elsevier.fr). The following information should be mentioned on the disk: name of the file, operating system (ex: MS DOS, Apple, Unix), word processor and version number (ex: Word 5.1). The texts will preferably have been edited in Word or (La)TeX. Tables must be saved in a separate file, in Word or Excel formats exclusively (except for (La)TeX-typeset files). Figures should be saved in TIFF (minimum 400 dpi resolution), EPS or Adobe Illustrator formats (except for (La)TeX-typeset files). EPS format is therefore not suitable for text-containing files. Figures in ?Word? format cannot be used. It is important to check that the files on the disk correspond to the final version. Only Zip disks will be returned.
Proof reading
Proofs should be checked immediately and carefully (only corrections of typographical errors can be made on the proofs) and returned within 48 hours by express (special delivery) mail or by fax to Editions scientifiques et m¨¦dicales Elsevier (ESME), 23 rue Linois, 75724 Paris cedex 15, France. If there is no reply within 8 days, the article will be published with just the publisher?s corrections. ?Author?s corrections?, i.e. any substantial changes to the text and figure made by the author on the proofs, other than typesetting errors or corrections required by the Editor-in-Chief of the Comptes rendus, will be charged to the authors at the normal rate adopted in the printing industry, i.e. EUR 19 inclusive of tax per page with corrections, with a minimum of EUR 38 inclusive of tax per article.
Reprints
Authors will receive 25 reprints of their article free of charge. Additional copies can be obtained at the authors? expense. Reprint order forms are sent out with the proofs and must be returned with them if additional reprints are required.
Return of original figures
Authors wishing to have their original figures returned should request this when returning their corrected proofs.
Editorial Board
Editorial Director:
 |
|
J. Dercourt,
|
Editor-in-Chief
|
|
E. Sanchez-Palencia,
|
Associate Editors:
|
|
S. Candel,
|
|
Ph.G. Ciarlet,
|
|
P. Huerre,
|
|
R. Moreau,
|
|
H. Petryk,
|
|
P. Ponte Castaneda,
|
|
J. Salencon,
|
|
E. Van der Giessen,
|
|
M.G. Velarde,
|
|
A. Zaoui,
|
Scientific Secretary:
|
|
R. Kerner,
|
Editorial Board:
|
|
V. Arnol'd,
|
|
J. Arsac,
|
|
A. Bensoussan,
|
|
G. Berry,
|
|
H.D. Bui,
|
|
H. Cabannes,
|
|
S. Candel,
|
|
C. Cercignani,
|
|
Y. Choquet-Bruhat,
|
|
Ph.G. Ciarlet,
|
|
P. Clavin,
|
|
M. Combarnous,
|
|
G. Comte-Bellot,
|
|
R. Dautray,
|
|
P. Deheuvels,
|
|
G. Duvaut,
|
|
O. Faugeras,
|
|
A. Favre,
|
|
P. Flajolet,
|
|
P. Germain,
|
|
R. Glowinski,
|
|
P. Huerre,
|
|
G. Huet,
|
|
G. Iooss,
|
|
A. Jaumotte,
|
|
G. Kahn,
|
|
D. Knuth,
|
|
P. Lax,
|
|
J.-B. Leblond,
|
|
A. Lin¨¢n,
|
|
O. Macchi,
|
|
C.-M. Marle,
|
|
Y. Meyer,
|
|
H. Moffatt,
|
|
R. Moreau,
|
|
N. Nivat,
|
|
L. Pandolfi,
|
|
M. P¨¦legrin,
|
|
P. Perrier,
|
|
H. Petryk,
|
|
O. Pironneau,
|
|
Y. Pomeau,
|
|
P. Ponte Castaneda,
|
|
P.-A. Raviart,
|
|
J. Rice,
|
|
M. Roseau,
|
|
J. Salencon,
|
|
E. Sanchez-Palencia,
|
|
P. Suquet,
|
|
E. Van der Giessen,
|
|
M.G. Velarde,
|
|
A. Zaoui,
|
|
