期刊名称:ADVANCES IN HIGH ENERGY PHYSICS
期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Advances in High Energy Physics is a peer-reviewed, open access journal that publishes original research articles as well as review articles in all fields of high energy physics. The journal is dedicated to both theoretical and experimental research.
Advances in High Energy Physics has been recently accepted for indexing in the Science Citation Index Expanded and will receive its first Impact Factor in mid 2011.
Advances in High Energy Physics is a peer-reviewed, open access journal that publishes original research articles as well as review articles in all fields of high energy physics. The journal is dedicated to both theoretical and experimental research.
Instructions to Authors
Submission
Manuscripts should be submitted by one of the authors of the manuscript through the online Manuscript Tracking System. Regardless of the source of the word-processing tool, only electronic PDF (.pdf) or Word (.doc, .docx, .rtf) files can be submitted through the MTS. There is no page limit. Only online submissions are accepted to facilitate rapid publication and minimize administrative costs. Submissions by anyone other than one of the authors will not be accepted. The submitting author takes responsibility for the paper during submission and peer review. If for some technical reason submission through the MTS is not possible, the author can contact ahep@hindawi.com for support.
Terms of Submission
Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by Hindawi or any other publisher. The submitting author is responsible for ensuring that the article's publication has been approved by all the other coauthors. It is also the authors' responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability. All enquiries concerning the publication of accepted papers should be addressed to ahep@hindawi.com.
Peer Review
All manuscripts are subject to peer review and are expected to meet standards of academic excellence. Submissions will be considered by an editor and—if not rejected right away—by peer-reviewers, whose identities will remain anonymous to the authors.
Article Processing Charges
Advances in High Energy Physics is an open access journal. Open access charges allow publishers to make the published material available for free to all interested online visitors. For more details about the article processing charges of Advances in High Energy Physics, please visit the Article Processing Charges information page.
Units of Measurement
Units of measurement should be presented simply and concisely using System International (SI) units.
Title and Authorship Information
The following information should be included
Paper title
Full author names
Full institutional mailing addresses
Email addresses
Abstract
The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should not exceed 150 words.
Introduction
This section should be succinct, with no subheadings.
Acknowledgments
All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.
References
Authors are responsible for ensuring that the information in each reference is complete and accurate. All references must be numbered consecutively and citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by Smith [9]”; “as discussed elsewhere [9, 10]”). All references should be cited within the text; otherwise, these references will be automatically removed.
Preparation of Figures
Upon acceptance of an article, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.
Preparation of Tables
Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Vertical rules should not be used.
Proofs
Corrected proofs must be returned to the publisher within 2-3 days of receipt. The publisher will do everything possible to ensure prompt publication. It will therefore be appreciated if the manuscripts and figures conform from the outset to the style of the journal.
Copyright
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution license, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Submission
Manuscripts should be submitted by one of the authors of the manuscript through the online Manuscript Tracking System. Regardless of the source of the word-processing tool, only electronic PDF (.pdf) or Word (.doc, .docx, .rtf) files can be submitted through the MTS. There is no page limit. Only online submissions are accepted to facilitate rapid publication and minimize administrative costs. Submissions by anyone other than one of the authors will not be accepted. The submitting author takes responsibility for the paper during submission and peer review. If for some technical reason submission through the MTS is not possible, the author can contact ahep@hindawi.com for support.
Terms of Submission
Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by Hindawi or any other publisher. The submitting author is responsible for ensuring that the article's publication has been approved by all the other coauthors. It is also the authors' responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability. All enquiries concerning the publication of accepted papers should be addressed to ahep@hindawi.com.
Peer Review
All manuscripts are subject to peer review and are expected to meet standards of academic excellence. Submissions will be considered by an editor and—if not rejected right away—by peer-reviewers, whose identities will remain anonymous to the authors.
Article Processing Charges
Advances in High Energy Physics is an open access journal. Open access charges allow publishers to make the published material available for free to all interested online visitors. For more details about the article processing charges of Advances in High Energy Physics, please visit the Article Processing Charges information page.
Units of Measurement
Units of measurement should be presented simply and concisely using System International (SI) units.
Title and Authorship Information
The following information should be included
Paper title
Full author names
Full institutional mailing addresses
Email addresses
Abstract
The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should not exceed 150 words.
Introduction
This section should be succinct, with no subheadings.
Acknowledgments
All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.
References
Authors are responsible for ensuring that the information in each reference is complete and accurate. All references must be numbered consecutively and citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by Smith [9]”; “as discussed elsewhere [9, 10]”). All references should be cited within the text; otherwise, these references will be automatically removed.
Preparation of Figures
Upon acceptance of an article, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.
Preparation of Tables
Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Vertical rules should not be used.
Proofs
Corrected proofs must be returned to the publisher within 2-3 days of receipt. The publisher will do everything possible to ensure prompt publication. It will therefore be appreciated if the manuscripts and figures conform from the outset to the style of the journal.
Copyright
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution license, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Submission
Manuscripts should be submitted by one of the authors of the manuscript through the online Manuscript Tracking System. Regardless of the source of the word-processing tool, only electronic PDF (.pdf) or Word (.doc, .docx, .rtf) files can be submitted through the MTS. There is no page limit. Only online submissions are accepted to facilitate rapid publication and minimize administrative costs. Submissions by anyone other than one of the authors will not be accepted. The submitting author takes responsibility for the paper during submission and peer review. If for some technical reason submission through the MTS is not possible, the author can contact ahep@hindawi.com for support.
Terms of Submission
Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by Hindawi or any other publisher. The submitting author is responsible for ensuring that the article's publication has been approved by all the other coauthors. It is also the authors' responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability. All enquiries concerning the publication of accepted papers should be addressed to ahep@hindawi.com.
Peer Review
All manuscripts are subject to peer review and are expected to meet standards of academic excellence. Submissions will be considered by an editor and—if not rejected right away—by peer-reviewers, whose identities will remain anonymous to the authors.
Article Processing Charges
Advances in High Energy Physics is an open access journal. Open access charges allow publishers to make the published material available for free to all interested online visitors. For more details about the article processing charges of Advances in High Energy Physics, please visit the Article Processing Charges information page.
Units of Measurement
Units of measurement should be presented simply and concisely using System International (SI) units.
Title and Authorship Information
The following information should be included
Paper title
Full author names
Full institutional mailing addresses
Email addresses
Abstract
The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should not exceed 150 words.
Introduction
This section should be succinct, with no subheadings.
Acknowledgments
All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.
References
Authors are responsible for ensuring that the information in each reference is complete and accurate. All references must be numbered consecutively and citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by Smith [9]”; “as discussed elsewhere [9, 10]”). All references should be cited within the text; otherwise, these references will be automatically removed.
Preparation of Figures
Upon acceptance of an article, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.
Preparation of Tables
Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Vertical rules should not be used.
Proofs
Corrected proofs must be returned to the publisher within 2-3 days of receipt. The publisher will do everything possible to ensure prompt publication. It will therefore be appreciated if the manuscripts and figures conform from the outset to the style of the journal.
Copyright
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution license, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Editorial Board
Botio Betev, Swiss Federal Institute of Technology, Switzerland P. J. Bussey, University of Glasgow, United Kingdom Duncan L. Carlsmith, University of Wisconsin, USA Kingman Cheung, National Tsing Hua University, Taiwan Poul Henrik Damgaard, Niels Bohr Institute, Denmark Shi H. Dong, Peking University, China Edmond Craig Dukes, University of Virginia, USA Paula Eerola, Lund University, Sweden Thomas Ferbel, University of Rochester, USA Frank Filthaut, University of Nijmegen, The Netherlands Joseph Formaggio, Massachusetts Institute of Technology, USA C. Q. Geng, National Tsing Hua University, Taiwan Cecilia Gerber, University of Illinois, Chicago, USA J. Gracey, University of Liverpool, United Kingdom Hong-Jian He, Tsinghua University, China Ian Jack, University of Liverpool, United Kingdom Ashutosh V. Kotwal, Duke University, USA Mark A. Mandelkern, University of California, Irvine, USA Pietro Musumeci, University of California, Los Angeles, USA John W. Norbury, NASA Langley Research Center, USA Dugan O'Neil, Simon Fraser University, Canada Seog H. Oh, Duke University, USA Sandip Pakvasa, University of Hawaii, USA Manfred Paulini, Carnegie Mellon University, USA Anastasios Petkou, University of Crete, Greece A. Petrov, Wayne State University, USA Ira Rothstein, Carnegie Mellon University, USA Kate Scholberg, Duke University, USA Frederik G. Scholtz, National Institute for Theoretical Physics, South Africa George Siopsis, University of Tennessee, USA Terry Sloan, Lancaster University, United Kingdom Neil Spooner, University of Sheffield, United Kingdom Luca Stanco, INFN Padova, Italy Richard J. Szabo, Heriot-Watt University, United Kingdom Nikos Varelas, University of Illinois, Chicago, USA Kadayam S. Viswanathan, Simon Fraser University, Canada Yau W. Wah, University of Chicago, USA Norbert Wermes, University of Bonn, Germany
|